What You Need to Know About a Loft Conversion for Your Home

If you have been thinking about going ahead with a loft conversion, you need to arrange for a consultation with a contractor who specialises in this type of home renovation. The features that decide the suitability of this transformation are the head height, the pitch, and the kind of architectural structure in which the renovation will be made. You also have to assess any obstacles, such as chimney stacks and water tanks. A thorough inspection of your roof space will reveal both the physical dimensions and the structure type.

Assessing Head Height

To assess head height, take a measurement from the ridge timber’s bottom to the ceiling joist’s highest point. The useable portion of the roof should be over 2.2m. With respect to the pitch angle, a higher pitch normally indicates that the central head height will be higher as well. If dormers are employed, or if the roof is redesigned, then you can also increase the area of the floor space.

Types of Roof Structures

Whitchurch builders that perform loft conversions state that two primary structures are used for the roof construction – traditionally framed types and truss section types. The traditional type is usually found in houses built before the 1960s. Because these buildings usually have more structural input, they are frequently more suitable for a loft or attic conversion. In general, the space can be expanded upon even further by adding supports or by strengthening the rafters.

Truss Constructions

Homes built after the 1960s were usually made from roof trusses. These constructions normally utilised thinner and cheaper timbers. However, their structural integrity is enhanced by the addition of diagonally braced timbers. This type of design permits a house’s roof to be erected and felted in as little as a day. However, it is also harder to open up this type of design, as the creation of a truss suggests that no loadbearing structures are included beneath.

A basic room in a roof loft conversion is the most affordable way to renovate your home, and it involves the reinforcement of your floor, the addition of skylights, and some added insulation. A staircase is built to access the loft, and the electrical components, the lighting, and heating are included as well.

About the author /


Post your comments

Your email address will not be published. Required fields are marked *

Editor’s Pick :-

Flickr